\u2018<\/strong>Designing out\u2019 emissions<\/strong><\/p>\n Emissions are being \u2018designed out\u2019 of HS2 buildings, with stations and depots using green technologies to cut carbon. For example, Curzon Street station has over forty opportunities for carbon reduction, resulting in a reduction in the station\u2019s lifetime emissions by over 87,000 tonnes of CO2 equivalent \u2013 that\u2019s the same as removing the emissions of over 10,000 houses, or the equivalent of travelling 500 million kilometres in your car. Interchange station also makes use of renewable technologies, and in operation, the station will use natural ventilation, daylight, harvested rainwater and solar energy to cut carbon.<\/p>\n Transporting materials by freight trains<\/strong><\/p>\n HS2 is cutting emissions by transporting materials by freight train, with 15,000 freight trains set to move 10 million tonnes of aggregate for HS2 over next ten years. Every freight delivery replaces 70 lorries – dramatically cutting carbon emissions of HS2\u2019s construction. HS2 has worked closely with Network Rail, the Main Works Civils Contractors, and Freight Operators for a number of years to make this possible, and to deliver on the project\u2019s commitment to move as much material as possible by rail rather than road to help benefit the environment.<\/p>\n Introducing renewable energy on construction sites<\/strong><\/p>\n In a major step towards greener construction sites, HS2 has trialled the world\u2019s first solar and hydrogen powered welfare cabins across construction sites, already cutting over 100 tonnes of carbon. The EasyCabin EcoSmart ZERO product is the world\u2019s first solar and hydrogen powered welfare unit, combining solar and hydrogen power to eliminate carbon emissions from construction sites, and is set to be rolled out further across the HS2 project.<\/p>\n Pioneering electric, zero-pollution machinery<\/strong><\/p>\n HS2 is pioneering the UK\u2019s first electric telehandler on one of its major construction sites in London. With zero pollution, the Eco Telehandler vehicle has been trialled on HS2\u2019s site at West Ruislip by main works civils contractor Skanska Costain STRABAG Joint Venture. It\u2019s estimated that over a week, it saved over 400 litres of fuel compared to a traditional combustion telehandler. By cutting pollution from emissions completely, it creates greener construction sites, improving air quality for workers and the local community.<\/p>\n Setting standards for the lowest vehicle emissions levels<\/strong><\/p>\n HS2 has set standards for the lowest emission levels available for all contractors\u2019 vehicle engines, as well as set targets for contractors to go beyond this as technology improves, and has also set industry leading emissions standards for all machinery including excavators, dumpers, large cranes and piling machines.<\/p>\n Strict dust control<\/strong><\/p>\n HS2 has set strict requirements for all contractors to control and limit their dust, air pollution, odour and exhaust emissions during works. Contractors use a range of dust management methods including damping down using mobile water sprayers, handheld hoses and water cannons to trap pollutants and stop them from escaping into the air.<\/p>\n Adopting a new plant emissions scheme<\/strong><\/p>\n HS2 is encouraging the supply chain to adopt a new plant emissions scheme, developed in conjunction with the Construction Equipment Association (CEA). The new CESAR ECV system is a \u2018bolt-on\u2019 product, complimenting the existing CESAR security system, which allows quick and easy verification of a machine\u2019s emissions category and helps ensure that emissions from plant are reduced where it cannot be avoided.<\/p>\n Rigorous monitoring of air quality<\/strong><\/p>\n HS2\u2019s air quality monitoring surveys add to existing national and local ones by Defra, local authorities, communities and academic institutions. Monitors on and around sites are used to measure the level of dust, with trigger alerts which provide near real-time feedback to contractors when dust concentrations reach a set level, allowing quick response and mitigation.<\/p>\n Ambitious plans to chan<\/strong>ge industry best practice<\/strong><\/p>\n HS2 has set ambitious targets for the supply chain to minimise emissions, and to develop best practise solutions to drive down emissions across the whole construction industry. For example, the Institute of Air Quality Management Guidance on Monitoring in the vicinity of Demolition and Construction Sites (October 2018) was updated following HS2\u2019s study with Kings College London to evaluate construction site monitoring strategies.<\/p>\n New Non-Road Mobile Machinery (NRMM<\/strong>)\u00a0low emission technology<\/strong><\/p>\n A project is underway with academic partners to develop an innovative NRMM retrofit which will add technology to existing exhaust and engine systems and recertify them as a newer engine class. This will reduce exhaust emissions and improve air quality for communities, the environment and our workforce, as well as bringing significant cost savings.<\/p>\n Photo credit: HS2 Ltd<\/em><\/p>\n For today’s rail news from railbusinessdaily.com click here.<\/a><\/p>\n
\n
![\"image_pdf\"](\"https:\/\/news.railbusinessdaily.com\/wp-content\/plugins\/pdf-print\/images\/pdf.png\" "\\"Download")